User Manual

lighting equipment and accessories

www.impactstudiolighting.com

impact

RST-001

Posing Stool

ASSEMBLY INSTRUCTIONS

Parts List

1 – seat cushion

1 – mounting plate

4 – 1/2˝ screws

1 – pneumatic cylinder

1 – pedestal base

5 – pedestal feet

seat cushion

1/2˝ screws

mounting

plate

pneumatic

cylinder

pedestal

base

pedestal

feet

Step One

Remove all the parts from the carton and make

certain you have all the items in the parts list

above and in the correct quantity.

Step Two

Insert the pedestal feet into the pedestal base.

Be sure all feet are inserted securely.

Step Three

Insert the pneumatic cylinder into the

pedestal base.

Step Four

Attach the mounting plate to the seat

cushion using the four 1/2˝ screws.

Tighten the screws ﬁrmly.

Step Five

Push the mounting plate and the seat

cushion down onto the pneumatic cylinder

until it is secure.

To adjust the seat height, pull up on the lever and

either push down on the seat to lower or pull up

to raise the height. Make certain all screws are

tightened fully before using this stool.

PAGE 1
impact lighting equipment and accessories RST-001 Posing Stool ASSEMBLY INSTRUCTIONS Parts List 1 – seat cushion 1 – mounting plate 4 – 1/2˝ screws 1 – pneumatic cylinder 1 – pedestal base 5 – pedestal feet seat cushion mounting plate 1/2˝ screws Step One Remove all the parts from the carton and make certain you have all the items in the parts list above and in the correct quantity. Step Two Insert the pedestal feet into the pedestal base. Be sure all feet are inserted securely.