Instruction Manual
SC-BP
Stage Clamp with Baby Pin
The Impact Stage Clamp with Baby Pin lets you hang a
light xture or equipment from pipe grids and lighting
trusses. The clamp’s dual-position locking bolt will
create a secure attachment to square or round tubing
up to 2 inches in diameter. Its solid steel construction
will easily support loads up to 110 pounds, and an
integrated safety hole at the end of the baby stud lets
you secure your xture with a safety pin.
Precautions ⚠⚡
•
Please read and follow these instructions, and keep
this manual in a safe place.
•
Make sure the light xture is properly secured to the
baby pin with the setscrew positioned in the recess
of the baby pin.
•
Make sure the clamp is properly secured to the pipe
grid or truss with the steel bolt.
•
Light xtures should be properly secured to the pipe
grid or truss with a safety cable.
• Do not exceed the maximum load capacity.
•
Always use a steel safety cable (not included) when
suspending a light xture or other assembly.
• All images are for illustrative purposes only.