User Manual
10
stand with a standard 5/8″ top mount. Turn the tightening knob to secure. Turn
the adjustment knob counter-clockwise to adjust the tilt of the monolight. Turn
the knob clockwise to secure the monolight in place.
Accessory S-mount
The Digital Monolight has an S-mount for light-modifying accessories. This can
be used with such optional add-ons as speed rings for softboxes. The included
umbrella reector lines up with the unit’s umbrella mount located on the
monolight’s stand mount.
To use accessories with the monolight’s S-mount, simply align the accessory
with the mount and insert. Once inserted, rotate the accessory clockwise to
secure. To remove it from the mount, hold down the mount release and reverse
the above instructions.
Umbrella Mount
To mount an umbrella to the monolight, rst attach the umbrella reector dish
using the above instructions. Then run the umbrella rod through the dish’s
umbrella hole and into the monolight’s umbrella mount. Secure the umbrella
using the umbrella tightening knob.