User Manual

17
The Impact Digital Monolight kit includes a wireless radio transmitter for
remote triggering. The transmitter is sold with the monolight kit only.
Visit www.impactstudiolighting.com for information on purchasing or replacing
a transmitter.
Setting Groups on the Monolight
This monolight has the ability to be set to one of four
groups: GA, GB, GC, or GD. To select a group, press
and hold the Slave button for four seconds. Press
the Slave button twice. Use the modeling light output
buttons to toggle between groups.
Setting Channels on the Monolight
The Impact Digital Monolight has an integrated 2.4 GHz, 16-channel radio
receiver. Set your devices to the same channel to trigger them all at the same
time. This also aids in avoiding radio interference from other devices in the area.
To set the channel, press and hold the Slave button for four seconds. Press the
Slave button once. Use the modeling light output buttons to toggle between
channels.
Special Functions (Kit Transmitter Only)
MODEL
FLASH
READY
110V AC
FLASH
2
MODEL
FLASH
READY
110V AC
FLASH
2