User Manual
16
The Impact Digital Monolight has seven optical slave/preash modes.
Activate the slave mode by pressing the slave button once. The slave indicator
light will appear over the Slave button. Press it again to turn it off.
To adjust the preash settings, press and hold the Slave button for four seconds.
Use the and buttons to toggle between preash settings.
C0: Using your master ash, release a test exposure.
The monolight will automatically memorize the
amount of preashes red.
C1: The monolight will ash when it detects
another ash.
C2: The monolight will trigger after one preash.
C3: The monolight will trigger after two preashes.
C4: The monolight will trigger after three preashes.
C5: The monolight will trigger after four preashes.
C6: The monolight will trigger after ve preashes.
C7: The monolight will trigger after six preashes.
Slave and Preash Settings