User Manual

15
The Venture Wireless Controller has
100 selectable ID numbers to ensure
that your Venture Monolight is not
triggered by another controller. To set
the ID number, follow these steps:
1. Press and hold the CH/MASTER
button while turning the power
on. The ID number will appear on
the screen.
2. Use the + or – buttons to select
the ID number:
• Press to change the ID number by
single digits.
• Press and hold to change the ID
number in increments of 10.
3. When the desired ID number
appears onscreen, press ENTER.
The ID number will be set, and
you will return to the main screen.
Note: In order to communicate with
your Venture TTL 600 monolight, make
sure it and the controller are set to
the same ID number. For instructions
on how to set the ID number, consult
the user manual that came with the
Venture TTL 600.
Setting the ID Number