SDS

Product Name R410A
Revision date 12-Jun-2014
_____________________________________________________________________________________________
_____________________________________________________________________________________________
Page 4 / 9
Handle in accordance with good industrial hygiene and safety practice
Ensure adequate ventilation, especially in confined areas
Keep away from heat, sparks, flame and other sources of ignition
Avoid contact with skin and eyes
Wash thoroughly after handling
When handling or unloading, be gentle. Do not damage the steel cylinder and accessories.
Use personal protection recommended in Section 8
7.2. Conditions for safe storage, including any incompatibilities
Keep container tightly closed in a dry and well-ventilated place
Keep the temperature below 52℃.
Keep away from heat and sunlight.
Store in accordance with local regulations
Keep away from food, drink and animal feeding stuffs
7.3. Specific end use(s)
Apart from the uses mentioned in SECTION 1.2 no other specific uses are stipulated.
SECTION 8: Exposure controls/personal protection
8.1. Control parameters
Pentafluoroethane
Sweden: TWA 2500mg/m3
Derived No Effect Level (DNEL)
No information available.
Predicted No Effect Concentration (PNEC)
No information available.
8.2. Exposure controls
Engineering Controls
Ensure adequate ventilation, especially in confined areas.
Personal protective equipment
Eye/face protection
Wear chemical safety goggles if necessary.
Hand Protection
Wear protective gloves
Skin and body protection
Suitable protective clothing
Respiratory protection
The concentration in air exceed standard, wear self- absorption filter type
respirator.
Environmental exposure controls
Do not allow into any sewer, on the ground or into any body of water
SECTION 9: Physical and chemical properties