Use and Care Manual

ManualsBrandsImpecca ManualsHeating, Ventilation, and Air Conditioning12000 BTU Heat and Cool Portable Air Conditioner with Electronic Controls, Remote with Temperature Sensor

AIR CONDITIONER FEATURES

Before you begin, thoroughly familiarize yourself with the control panel and remote controller

and all its functions, then follow the symbol for the functions you desire.

The unit can be controlled by the unit control panel alone or with the remote controller .

ELECTRONIC CONTROL OPERATING INSTRUCTIONS

Fig.3

NOTE: This manual does not include Remote Controller Operations, see the <<Remote

Controller Instruction>> packed with the unit for details.

OPERATION PANEL OF THE AIR CONDITIONER

Used to initiate the SLEEP operation.

SLEEP button

Control the fan speed. Press to select the fan

speed in four steps-LOW, MED, HI and AUTO.

The fan speed indicator light illuminates under

different fan settings except AUTO speed. When

select AUTO fan speed, all the fan indicator lights

turn dark.

NOTE: Press this button for 3 seconds to initiate

ION feature.The ion generator is energized and will

help to remove pollen and impur ities from the air, and

trap them in the filter. Press it for 3 seconds again to

stop the ION feature.

FAN/ION button

22334444556677

(Optional)

(ION is Optional)

Selects the appropriate operating mode.

Each time you press the button, a mode

is selected in a sequence that goes from

AUTO, COOL, DRY, FAN and HEAT(cooling

only models without). The mode indicator

light illuminates under the different mode

settings.

MODE select button

Power switch on/off.

POWER button

Used to adjust (increasing/decreasing)

temperature settings(1 C/2 F increments)

in a range of 17 C(62 F) to 30 C(88 F) or

the TIMER setting in a range of 0~24hrs..

UP( ) and DOWN( ) button

NOTE: The control is capable of displaying

temperature in degrees Fahrenheit or degrees

Celsius. To convert from one to the other, press

and hold the Up and Down buttons at the same

time, for 3 seconds.

TIMER button

Used to initiate the AUTO ON start time and

AUTO OFF stop time program, in conjuction

with the & buttons. The timer on/off

indicator light illuminates under the timer

on/off settings.

SWING button

(Applicable to the models with auto swing feature only)

Used to initiate the Auto swing feature.

When the operation is ON, press the

SWING button can stop the louver at

the desired angle.

(ION is optional)

Shows the set temperature in C or

F and the Auto-timer settings.

While on DRY and FAN modes, it shows

the room temperature.

LED Display