User guide

ENGLISH
–17–
5. Drive ½” (13mm) locking screws through frame holes into window sash (See Fig. 9 and Fig. 10).
6. To secure lower sash in place, attach right angle sash lock with 3/4” (19mm) or ½” (13mm) screw
as shown. (See Fig.11).
7. Cut foam seal and insert in the space be-
tween the upper and lower sashes (See Fig. 12)
REMOVING AC FROM WINDOW
• Turn AC o and disconnect power cord.
• Remove sash seal from between windows and unscrew safety lock.
• Remove screws installed through frame and frame lock.
• Close (slide) side panels into frame.
• Keeping a firm grip on air conditioner, raise sash and carefully “rock” air conditioner backward to
drain any condensation in the base of the unit. Be careful not to spill any remaining water while li-
ing unit from the window.