User guide

ENGLISH

–18–

STEP 2: INSTALL UPPER RAIL

1. Aix foam gasket to bottom of upper rail bracket (if not

already aixed).

2. Install upper rail using a total of 3 #10, ¼" screws.(See

FIg. I)

STEP 3: ASSEMBLE WINDOW FILLER PANELS

1. Place the cabinet on a steady surface such as a floor,

bench or table.

2. Slide I section of window filler panel into side retainer on

the side of the cabinet. Do this for both sides (Figs. J, K).

3. Slide the filler panel’s horizontal top and bottom rails into the channels on both the

bottom of the cabinet and the upper angle bracket.

STEP 4: PLACE CABINET IN WINDOW

1. Open window and mark center of window stool as shown in Fig. L.

2. Place cabinet in window with the bottom stool angle seated over the window stool

as shown. Bring window down temporarily behind upper rail to hold cabinet in

place (Fig. M).

3. Shi cabinet le or right as needed to line up the center on the line you marked on

the window stool.

A B

Fig. I

Plastic

Frame

Window Filler

Panel

Side Retainer

Top

View

Air Conditioner

Cabinet

Plastic

Frame

“I” Section

Window

Filler Panel

Locking

Screw Hole

Fig. J Fig. K

Stool

Angle

Fig. L Fig. M