Use and Care Manual

–7–
ENGLISHESPAÑOLFRANÇAIS
Attach the le upper door self-locking block and the le door-
open stopper to the le side of the freezer door.
Remove the right upper door self-locking block and the right
door-open stopper. Store in a safe place in case you need to
reverse the door position again.
Remove the two hole caps from the le side, where the center
hinge will go, and insert them into the right side.
Attach the refrigerator door on the bottom hinge and then
attach the le center hinge to the le side of the refrigerator.
STEP 6 REINSTALLING THE FREEZER DOOR
Put the freezer door onto the le center hinge and then attach
the top le hinge to the top of the refrigerator. Cover the hinge
with the top le hinge cover and cover the screw holes on the
right side of the top with the cover plate (removed in a previ-
ous step).
STEP 7 REMOVING DOOR HANDLES
Remove the screw caps on the door handles. Use an Allen
wrench to remove the four Allen-screws securing the handles
to the le side of the freezer and refrigerator doors. Remove
the handles.
STEP 8 REINSTALLING THE DOOR HANDLES
Remove the four Phillips-head screws from the le side of the
freezer and refrigerator doors. Screw the four Phillips-head
screws into the holes on the right side of the freezer and refrig-
erator doors.
Attach the handles to the right side of the freezer and refriger-
ator doors with the Allen-head screws removed in a previous
step. Tighten with the Allen wrench and replace the screw
caps.
STEP 9 REFITTING HOLE PLUGS AND HANDLE CAPS
Replace all handle hole plugs into the remaining holes on the
le side. Refit the handle caps onto the ends of handles to
cover screw holes.
Attach the le center hinge
Attach the top le hinge
Upper door
self-locking block
Le door-open
stopper