Slim Line—N1900 Select 10—1900-10 Installation Instructions & Warranty Information 425 Apollo Street Brea, CA 92821 www.imperialhoods.com (800) 851-4192 DO NOT THROW AWAY, PROPERTY OF THE HOME OWNER! UNDRCAB/11.13.
Imperial Cal Products, Inc. Read Before Starting Installation! Inspect your range hood prior to installing! Any cosmetic defects must be reported to us prior to installation. Once this hood is installed, ICP will NOT accept any responsibility for any cosmetic blemishes, scratches or dents in the Canopy. Save all original packaging if you wish to return for any reason! FIRST: Check your local building and electrical codes.
Slim Line Series Installation Details: MODELS N1900T N1900SD2 MODELS N1900BP1 MODELS N1900BP CABINET: Be sure that the cabinet bottom is level, side to side and front to rear. BP & T: Cut an 8” x 8” hole in the bottom of the cabinet, 3/4” in from the rear wall and on center line.BP1: Cut an 8” x 8” wide hole that is 4.25” off center in the bottom of the cabinet, 3/4” in from the wall. Shelves and top to be cut to clear 7” round pipe to line up with the bottom cabinet cut out.
Select 10 Series Installation Details: MODELS 1900T-10 MODELS 1900PS-10 MODELS MODELS 1900PSB-10 1900TB-10 (B INDICATES BAFFLE FILTERS) CABINET: Be sure that the cabinet bottom is level, side to side and front to rear. T & PS models: Cut an 8” x 8” hole in the bottom of the cabinet, 3/4” in from the rear wall and on center line. Shelves and top to be cut to clear 7” round pipe to line up with the bottom cabinet cut out. Also, cut holes for electrical wires.
Installation Instructions for 1900-10 ONLY Wall Mounting application. 1. 2. 3. 4. 5. 6. From bottom of hood, measure 10” up and draw a line. Take “U” shape installation bracket and line the bottom of the bracket up with the line (center bracket left to right) install bracket using #10 x 2-1/2” wood screws, if you have wood to screw in to. If not use the 3/16” x 3” toggle bolts. Lift up hood and connect hood brackets to installation bracket using (8) 10-32 Hex Keps nuts and (8) 10-32 x 3/4 screws.
Imperial Cal Products, Inc. To order replace parts or schedule service please call our office at (800) 851-4192 or use our website… www.imperialhoods.com. PARTS: When ordering Parts we need the following information: Model Number (not serial number) found on UL label inside hood. Exact dimensions (in the case of filters) You can find the model number on the inside of your hood on our UL label.
Maintenance & Warranty Information RANGE HOOD CLEANING—When cleaning a painted hood, wash it with mild, soapy water ONLY! Wipe the hood thoroughly with clean water and dry with soft cloth. When cleaning Stainless Steel use a cleaner specifically for Stainless Steel. Always rub with the grain using non-abrasive cleaning materials. AVOID detergents, disinfectants or cleaning products in aerosol cans.
SAFETY INSTRUCTIONS Read and Save These Instructions Warning: To reduce the risk of fire, electrical shock or injury to persons, observe the following: A. Use this unit only in the manner intended by the manufacturer. If you have any questions, contact the manufacturer. Before servicing or cleaning unit, switch power off at service panel and lock Service Disconnecting Means to prevent power from being switched on accidentally.
Sélectionnez 10—1900-10 Slim Lin—N1900 Instructions d'installation & Informations sur la garantie 425 Rue Apollo Brea CA 92821 www.imperialhoods.
Impériale Cal Products, Inc. Lire avant de commencer l'Installation ! Inspecter avant d'installer votre hotte de cuisinière ! Les défauts cosmétiques doivent nous être signalés avant l'installation. Une fois cette hotte est installée, ICP n'acceptera aucune responsabilité pour toute les imperfections cosmétiques, rayures ou bosses dans la canopée.
Détail d'Installation Liners alimenté : MODELS: N1900T N1900SD4 MODELS: N1900BP1 N1900PS Armoire : N'oubliez pas que la base de l'armoire est de niveau, côté à l'autre et d'avant en arrière. BP & T: couper un trou de 8 « x 8 » en bas de l'armoire, 3/4 "de la paroi arrière et sur la ligne médiane.BP1 : Découper un trou de 8 « x 8 » de large c'est 4.25 "décentré dans le bas de l'armoire, 3/4" à partir du mur. Étagères et haut à couper pour effacer 7 "arrondir tuyau à ligne avec meuble bas découper.
Détail d'Installation Liners alimenté : MODELS: 1900T-10 MODELS: 1900PS-10 MODELS: 1900TB-10 (Baffle Filters) 1900PSB-10 (Baffle Filters) Armoire : N'oubliez pas que la base de l'armoire est de niveau, côté à l'autre et d'avant en arrière. PS: Découper un trou de 8 « x 8 » en bas de l'armoire, 3/4 "de la paroi arrière et sur la ligne médiane. T & PS : découper un trou 8 « x 8 » large qui est 4.25 "décentré dans le fond du coffret, 3/4" dans du mur.
Instructions d'installation pour l'application de montage mural. 1. 2. 3. 4. Par fond de hotte, mesurer 10 "vers le haut et tracez une ligne. Relever le support d'installation forme « U » et la ligne au bas de la fixation avec le support d'installation de ligne (Centre support gauche à droite) à l'aide de #10 x 2-1/2 "bois de vis, si vous avez des bois à visser à. Si ce n'est pas le cas, utiliser les boulons de 3/16 « x 3 ».
Impériale Cal Products, Inc. Pour commander des pièces ou annexe service, veuillez appeler notre bureau au (800) 851-4192 ou utiliser notre site Web... www.imperialhoods.com. PIÈCES : Lorsque vous commandez des pièces nous avons besoin des informations suivantes : Numéro de modèle (pas les numéro de série) sur l'étiquette d'UL à l'intérieur de la hotte. Dimensions exactes (dans le cas des filtres) Vous pouvez trouver le numéro de modèle à l'intérieur de votre hotte sur notre label UL.
Entretien & garantie Information Ce produit est le plus simple des exigences en matière de nettoyage. Pour supprimer les filtres des baffles, enlever le panneau Centre en tirant le panneau vers l'avant de la hotte, soulever pour la supprimer. Déplacer les filtres au centre du capot, déflecteur de tirer vers l'avant de la hotte et sortez. Pour retirer le bac à graisse, faites glisser le plateau vers le haut de la hotte et sortez. Filtres propres souvent pour des performances optimales.
CONSIGNES DE SÉCURITÉ Lire et conserver ces Instructions AVERTISSEMENT : Pour réduire le risque d'incendie, de chocs électriques ou de blessures, respectez les points suivants : Utilisez cet appareil que de la façon prévue par le fabricant. Si vous avez des questions, contactez le fabricant. Avant de réparer ou de nettoyer l'appareil, coupez l'alimentation électrique hors tension au panneau électrique et verrouillez Service moyens de déconnexion pour éviter sa marche accidentellement.
Mail warranty card to: Imperial Cal Products ATTN: Warranty Department 425 Apollo St. Brea, CA 92821 Or visit our website to complete warranty registration: www.imperialhoods.com MUST keep receipt. Proof of original purchase date is needed to obtain service under warranty. Warranty card can be submitted via our website at: www.imperialhoods.com or by mail.