Instructions

135

134

DABMAN i450CD

There is a risk of explosion if not used properly!

Please read the related safety information in Chapter 2.8.

Pay attention to the correct polarity of the battery!

Then reinsert the battery compartment and replace the screw.

6.3 Mounting the antenna

Screw the included antenna into the radio’s antenna connector.

6.4. Power connection

Connect the included power supply unit to the corresponding

socket on the back of the device. Now plug the power supply unit

into a 230V socket. Then pull out the telescopic antenna on the

back of the radio to its full length to ensure the best possible

reception if you wish to receive terrestrial transmitters via the

antenna.

6. INSTALLATION