Connect the supplied antenna to the antenna port.
7.3. DAB scan
Turn on the device using the standby switch on the front panel of the
The radio will turn on and will scan for DAB + radio reception.
Once this is completed and the radio has received a signal, it will
start to play back the ﬁrst DAB station it found..
All DAB + stations which have been found are automatically saved
and stored in a DAB station list.
The radio is now ready for operation.
To customise the DABMAN d10 to suit your preferences, you can
conﬁgure the radio via the menu.
To perform an analogue FM scan, please follow these steps:
7. FIRST USE
Dabmann D10_03_17_2.indd 66 19.04.17 14:49