User Manual

106
Operating Manual
E
10.2 Playing media via Bluetooth
If you have established a Bluetooth connection as described in Chapter 10.1, you can
play music files stored on an external device via the
DABMAN i300 CD.
To do so, proceed as follows:
Start playback of the music on the external device by switching to the corresponding
playback function (MP3 player, etc.) or select a track from the respective playlist and
start playback.
11. AUDIO INPUT
You can play the sound of an external device on the DABMAN i 300 CD.
> Connect the external device to the audio input on the rear panel of the
radio.
> Press the MODE button repeatedly until [AUX IN] appears on the display.
Alternatively:
> Press the MENU button, and then select Main Menu AUX IN.
To optimally set the volume, use both the volume adjuster on
the radio as well as the connected device.
Please note that a very low volume setting of the connected device and a correspon-
dingly higher volume setting of the radio will also amplify annoying noise/interference
to a greater extent and thus be heard more clearly. We thus recommend adjusting the
volume of the DABMAN i300 CD e.g. on a DAB+ or FM station, switching to the audio
input and then adjusting the volume of the connected device so that the total volume of
the audio input roughly corresponds to the volume of the DAB+/ FM station. This way
you can also avoid major volume differences when switching between the DABMAN
i300 CD functions.