User Manual

67
IMPERIAL DABMAN i300 CD
E
2.4. Connecting the device
> Only plug the device into properly
installed, earthed and electrically secured power sockets.
> Please keep the power source (socket) easily accessible.
> Do not bend or squeeze any cables.
> Before using the device, check whether the voltage specification on the device
corresponds to your local power voltage. The specifications on the power unit must
correspond to the local power grid.
> Only plug the device into a properly
installed grid socket with 220-240 V
alternating current, 50-60 hz.
> Place the radio on a solid, even surface.
> The device consumes power in standby mode.
To fully switch off the device, the power plug must be pulled from the socket or
the power unit on the back of the device must be
switched off.
2.5. Protecting the device against damage
> Unfavourable surrounding conditions, such as moisture, excessive heat or a lack of
ventilation may damage the device.
> Only use the device in dry rooms.
Avoid direct proximity to heat sources, such as radiations, open fires (e.g. from
candles), devices with a strong magnetic field, such as
loudspeakers.Do not expose the device to extreme conditions,
such as direct sunlight, severe humidity, moisture, extremely high or low
temperatures, open flames.
> Ensure sufficient distance to other objects
to prevent the device from being obstructed, so that sufficient
air ventilation is guaranteed.
> Avoid direct sunlight and places
with an exceptional amount of dust.
> Do not place any heavy objects on the device or the power unit.
> Do not use the device in areas that have a high explosion risk.
These include, for example, petrol storage areas, petrol stations,
or areas in which solvents are stored or processed.
> Do not use the device in areas with air that is
polluted with particles (e.g. flour or wood-chip dust)