User Manual

85
IMPERIAL DABMAN i300 CD
E
Once the password has been completely entered, go to the [ok] field. Please do not
confirm each letter with [ok] as this would lead to cancelling the entry.
After confirming with the OK button, the DABMAN i300 CD sends the password to
the router (‘Please wait’ is displayed), which - after successful adjustment - logs in the
DABMAN i300 CD (‘Connected’ is displayed).
If everything was successful, the network setup wizard will display the message
‘Settings completed’. Pressing the navigation wheel takes you back to the main menu.
Your entries and settings are stored in the device and do not have to be made a second
time. The next time you switch on the
DABMAN i300 CD, it will automatically find your router and dial into the network.
7.1.5. Manually setting up the wireless connection on the radio
In some networks, static IP addresses are distributed for certain access conditions - the
administrator will tell you what these should be.
See ‘static IP’
Please select Switch off DHCP in the following menu. Here you can enter the correspon-
ding values
with the navigation wheel.
To reach large numbers (e.g. 192) faster, turn the wheel to the left. To move to the next
window, press the wheel or the OK button on your remote control once.
After that, the gateway address must be specified.
Now just enter the DNS address.
Now a connection is established and the settings are saved in the DABMAN.