User Manual

98
Operating Manual
E
when converting audio files to MP3. Music files with the ending *.AAC, *.DLF,
*.M3U and *.PLS or *.WMA cannot be played.
Due to the variety of different encoder software, it cannot be guaranteed
that every MP3 file can be played without problems.
If the track/file is faulty, the next track/file is played.
It is advantageous to burn the CD at low speed when burning and to create and
finalise the CD in a single session.
The CD player is compatible with CD, CD-R/RW and MP3 CD media. You can play all the
discs mentioned
here (disc size 12 cm CDs, playing time 74 min.) on this device.
When transporting the device, remove the disc from the drive.
This will prevent damage to the CD player and the disc.
The playback quality of MP3 CDs depends on the bit rate setting
and the burning software used.
8.15.2. Play a CD
> Press the MENU button, and then select Main Menu > CD.
> To insert a CD, press the eject button on the device or on the
remote control and carefully insert the CD with the label on the
top into the tray.
Make sure that the CD is not crooked.
> To insert or remove the CD, please only touch the edge of the CD.
> Wait until the CD contents have been completely read
to ensure that all required information has been read from the
CD. This may take some more time in the case of MP3 CDs
especially.
> Press the Play/Pause button on the remote control (11)
to start/pause playback (the play time flashed in the display).
> Press the STOP button on the remote control (6) to stop playback.
> The display shows the total number of tracks.
> Always stop playback before removing a CD.
> If there is no playback, the DABMAN i300 CD will enter standby mode
after approx. 15 minutes.