Operation Manual

Using the oven
Below is an example of setting a simple
programme.
To bake a cake using Fan heat D at
150 °C.
^
Place the cake in the oven and close
the door.
^
Turn the function selector to the
Fan heat D position.
The pre-set temperature for that
function of 160 °C will appear in the
oven display.
^ Use the – button to reduce the
temperature to 150 °C whilst the -
triangle is flashing under the"U"
symbol.
Once this setting has been accepted
–
the actual temperature in the oven
will be displayed,
–
the oven heating will switch on,
–
together with the cooling fan.
^
Take the cake out of the oven when it
is ready and turn the function
selector back to the "0" position.
The cooling fan will continue to run for
a while after the oven has been
switched off to prevent any humidity
building up in the oven, on the control
panel or in the oven housing unit.
"°C" will continue to show in the display
to warn you that the oven is still hot.
When the temperature in the oven has
fallen sufficiently the cooling fan will
switch off automatically and the display
will go out.
The oven will cool down faster if the
door left partially or fully open.
Using the oven
30