Operation Manual

Switching on and off automatically
Example:
The time is 9:05. A dish needs 1
1
/
2
h
using Fan heat at 160 °C and needs to
be ready at 13:15.
^
Place the dish in the oven and close
the door.
^
Select your cooking function and set
a temperature.
First enter the duration :
^
Call up the g symbol for duration.
"0:00" will appear in the clock / timer
display.
^ Enter the duration (1
1
/
2
h) in
Hours:Minutes.
Now set the End time :
^
Call up the ) symbol for End time.
The time of day plus the cooking time
entered appear in the display (9:05 +
1:30 = 10:35).
^
Use the + button to change the end
time to 13:15.
Once this setting has been accepted
– the oven heating and cooling fan
switch off,
– the g and ) symbols indicate that
a programme has been set.
A start time (11:45) will show in the
display, when you call up the f
symbol.
The oven will start heating up at this
time and the duration will then be
displayed.
Once the time set has elapsed, the
oven will switch itself off automatically.
When baking the delay period set
should not be too long! Otherwise
batter or dough will dry out and the
raising agents will lose their
effectiveness.
Programming cooking times
37