Operation Manual
3434
GB
• the radio.
• Turn on the MP3 player and start the playback.
• Turn on the radio by pressing and holding the STBY/FUNC button.
• Select the AUX mode by briey pressing the STBY/FUNC button. The
message "AUX Mode" will appear in the display.
• The volume of the playback can be controlled with the volume control
of the DABMAN 110 (see chapter 4, table 6). All other functions, such as
forward or rewind, pause playback, etc., can be controlled with the externally
connected device.
9. Alarm and Sleep Functions
The time-bound functions of the DABMAN 110 are summarised under this point.
In addition to the sleep timer, the radio also has two alarm clocks.
9.1. Sleep Timer
The DABMAN 110 is equipped with a sleep timer. If this function is activated, the
radio automatically switches off after a certain period of time (1/20/30/60/90/120
minutes). The sleep timer is disabled in the factory settings. To activate this
feature, please proceed as follows:
• Press and hold the menu button during operation (see chapter 4, table 4)
to open the sleep timer menu. The message "time setting sleep" will appear
in the display.
• Use the Up/Down buttons (see chapter 4, table 9 & 11) to select the
desired time period after which the sleep timer should come on. The following
options are available: (off/1/20/30/60/90/120 minutes). Conrm your
selection with OK, the sleep timer is now activated. A bubble icon with "ZZZ"
will be displayed next to the time.
• To deactivate the sleep timer, access the sleep timer menu again, select the
option "off" by using the Up/Down buttons (see chapter 4, table 9 & 11) and
conrm with OK. The sleep timer is now disabled.
9.2. Alarm Clock
In addition to displaying the time and date the DABMAN 110 has 2 alarms that
can be set independently. Setting each alarm (alarm 1 and alarm 2) follows the
same scheme. To set the alarm, proceed as follows:
• Press and hold the Alarm/Snooze button during operation (see chapter 4,
table 13), until the message "set alarm 1" appears in the display. In addition,
a bell symbol with the number 1 will ash in the display to the left of the time.
• Now press and hold the OK button, the alarm time assistant will guide you
through the other settings. First, select the desired alarm time in hours
and minutes by using the Up/Down buttons (see chapter 4, table 9 & 11).
Conrm each entry with OK. The following items are also set by using the
Up/Down buttons and by conrming the selection with OK.