Operation Manual

3737
GB
•
10.3. Factory settings
In this menu item you can reset the DABMAN 110 to its factory settings. This
may be necessary if changes in the basic settings triggered an impairment of
the functions of the DABMAN 110.
Important note: by accessing the factory settings, all individual settings,
such as preset station lists or alarms, are lost!
To access the factory settings, please proceed as follows:
• Press the menu button.
• Use the Up/Down buttons to select "System", and conrm your selection
with OK.
• Use the Up/Down buttons to select "factory settings", conrm the selection
with OK.
• Now select "Yes" by using the Up/Down buttons and conrm with OK.
• The message "restart" appears in the display - the radio was reset to the
factory settings, time and date are ashing.
10.4. Software Version
Through the system menu you can display the operating software available
on the DABMAN 110. This can be useful if you wish to contact our technical
support for example. To access the software information proceed as follows:
• Press the menu button.
• Use the Up/Down buttons to select "System", and conrm your selection
with OK.
• Use the Up/Down buttons to select "SW version", and conrm your
selection with OK.
• The display now shows the name of the software available on the device
as ticker text.
11. Troubleshooting Guide
Problem Poss. Cause Solutions
No operation possible The device is hung up Unplug the device for
about 5 seconds from
the power supply and
turn off the device via
the slide switch. Then
reconnect and turn on.
No sound The volume is too low Increase the volume by
using the corresponding
controller