Operation Manual

11 IMPERIAL DABMAN 40
D
5.2.5 Wechseln zwischen DAB und UKW-Modus
Um den DAB- oder UKW-Modus zu wählen, drücken Sie wiederholt die Taste “MODE”, um
den DAB- bzw. UKW-Modus zu wählen.
5.2.6 UKW-Radio hören
5.2.6.1 Automatische Sendersuche
1. Drücken Sie “SCAN” um automatisch den nächsten (◄) oder vorherigen (►) verfüg-
baren Sender einzustellen.
INFO: Wenn Sie die Tasten ◄ oder ► nicht drücken, ehe Sie “SCAN” drücken, führt
der DABMAN einen automatischen Suchlauf durch und zwar aufwärts oder abwärts,
je nachdem, welche Richtung zuletzt gedrückt wurde.
5.2.6.2 Manuelle Sendersuche
1. Drücken Sie ◄ oder ► um jeweils einen Schritt von
0,1 MHz aufwärts oder abwärts einzustellen.
2. Um die Frequenz schnell zu verändern, drücken Sie
◄ oder ► und halten Sie die Taste gedrückt.
3. Wiederholen Sie diese Schritte, bis Sie den gewün-
schten Sender finden.
INFO: Wenn der eingestellte Sender Stereoton sendet, gibt das Radio automatisch den
Stereoton wieder.
5.2 RADIO HÖREN
PR100
+
User Guide
6
To Listen to the FM Radio
Auto Tune
1. Press ◄ or ► to select a scan up or down.
2. Press Scan to auto tune to the next (►) or previous (◄) available station.
FM 87.50MHz
Signal Strength
FM 87.50 MHz
SERVICE NAME
Scan up ...
If you do not press ◄ or ► before pressing Scan, PR100
+
will perform auto
tune by the up or down direction latest pressed.
Manual Tune
1. Press ◄ or ► to step up or down 0.1MHz each time.
2. Press and hold ◄ or ► to quickly change the frequency number.
3. Repeat the steps above until you find the desired radio.
If the listening station supports stereo sound, PR100
+
will auto play sound with
stereo or mono by signal.
FM 87.50MHz
Signal Strength
FM 87.50 MHz ST
SERVICE NAME
To Save a Preset
You can save up to 15 DAB and 15 FM stations on the 5 buttons for easy access.
Each button can save 3 stations.
1. In DAB or FM, tune to the station you want to save.
2. Press X (X from 1 to 5) repeatedly until the desired code 《Preset X-Y》(Y from
1 to 3) is displayed. The second line of screen will display《 Empty 》or
《 Service Name 》.
Preset 1-1
Empty
Preset 1-3
BBC NEWS
3. Press and hold X until the second line of screen shows《Station Saved》.
To Recall a Preset
1. In DAB or FM, press X repeatedly until the desired station is displayed.
2. The system will start tuning after 4 seconds.
PR100
+
User Guide
6
To Listen to the FM Radio
Auto Tune
1. Press ◄ or ► to select a scan up or down.
2. Press Scan to auto tune to the next (►) or previous (◄) available station.
FM 87.50MHz
Signal Strength
FM 87.50 MHz
SERVICE NAME
Scan up ...
If you do not press ◄ or ► before pressing Scan, PR100
+
will perform auto
tune by the up or down direction latest pressed.
Manual Tune
1. Press ◄ or ► to step up or down 0.1MHz each time.
2. Press and hold ◄ or ► to quickly change the frequency number.
3. Repeat the steps above until you find the desired radio.
If the listening station supports stereo sound, PR100
+
will auto play sound with
stereo or mono by signal.
FM 87.50MHz
Signal Strength
FM 87.50 MHz ST
SERVICE NAME
To Save a Preset
You can save up to 15 DAB and 15 FM stations on the 5 buttons for easy access.
Each button can save 3 stations.
1. In DAB or FM, tune to the station you want to save.
2. Press X (X from 1 to 5) repeatedly until the desired code 《Preset X-Y》(Y from
1 to 3) is displayed. The second line of screen will display《 Empty 》or
《 Service Name 》.
Preset 1-1
Empty
Preset 1-3
BBC NEWS
3. Press and hold X until the second line of screen shows《Station Saved》.
To Recall a Preset
1. In DAB or FM, press X repeatedly until the desired station is displayed.
2. The system will start tuning after 4 seconds.