Operation Manual

15 IMPERIAL DABMAN 40
D
Das Signal des IMPERIAL DABMAN 40 kann über die 3,5 mm Audio Ausgangsschnitts-
telle an der rechten Seite mit einem anderen Audiogerät verbunden werden.
INFO: Die Signalstärke von der Audio Ausgangsstelle kann mittels des Lautstärkereglers
justiert werden.
5.5.1 Uhrzeit automatisch einstellen
Das Gerät bietet Optionen zur manuellen Einstellung von Zeit und Datum oder diese Pa-
rameter können automatisch über das DAB/UKW-Radiosignal aktualisiert werden.
1. Drücken Sie die Menütaste um zur Menüliste zu ge-
langen.
2. Drücken Sie ◄ oder ► bis Sie “Datum und Uhrzeit“
finden, drücken Sie dann “SELECT/INFO”.
3. Drücken Sie ◄ oder ► bis Sie „Auto Aktualisierung“
finden, drücken Sie dann “SELECT/INFO” und wäh-
len Sie “Automatisch”.
4. Drücken Sie ◄ oder ► bis „An“ angezeigt wird,
drücken Sie dann “SELECT/INFO” um die automa-
tische Aktualisierung einzuschalten.
INFO: Wenn die Funktion zur automatischen Aktuali-
sierung eingeschaltet ist, können Sie nicht die Op-
tionen „Datum einstellen“, „Zeit einstellen“ oder
„Sommerzeit“ wählen.
INFO: Werksseitig ist diese Funktion auf „Aus“ geschaltet.
5.5.2 Datum manuell einstellen
Wenn Sie die Funktion “Auto Aktualisierung” abschalten, müssen Sie Zeit und Datum
manuell einstellen.
1. Drücken Sie die Menütaste um die Menüliste an-
zuzeigen.
2. Drücken Sie ◄ oder ► bis Sie „Datum und Uhrzeit“
finden, drücken Sie dann “SELECT/INFO”.
3. Drücken Sie ◄ oder ► bis „Datum einstellen“ an-
gezeigt wird, drücken Sie dann “SELECT/INFO” und
stellen Sie das Datum ein.
4. Drücken Sie ◄ oder ► um das Jahr auszuwählen,
drücken Sie zur Bestätigung “SELECT/INFO”. Ver-
fahren Sie ebenso, um Monat und Tag einzustellen.
5.4 AUDIOAUSGANG
5.5 MENÜKONTROLLE
PR100
+
User Guide
9
Using the Menu control
To Update Clock Automatically
The device provides options for setting time & date manually or update time & date
automatically from the DAB/FM radio signal.
1. Press Menu to access the menu list.
2. Press ◄ or ► to find《Time & Date》and then press Select/Info to select Clock
Setting.
Menu
<Time & Date>
3. Press ◄ or ► to find《Auto Update》and then press Select/Info to select Auto
Update setting.
Time & Date
<Auto Update>
4. Press ◄ or ► until《On》is displayed and then press Select/Info to switch on
Auto Update.
When Auto Update is on, you cannot select “Date Setting”, “Time Setting”
and ”Daylight Saving”.
The default setting is “Off”.
To Set Date Manually
If you turn off Auto Update, you need to set time and date manually.
1. Press Menu to access the menu list.
2. Press ◄ or ► to find《Time & Date》and then press Select/Info to select Clock
Setting.
3. Press ◄ or ► to until《Date Setting》is displayed and then press Select/Info to
set date.
Time & Date
<Date Setting>
4. Press ◄ or ► to select year and then press Select/Info to confirm. Then use
the same way to set month and date.
PR100
+
User Guide
9
Using the Menu control
To Update Clock Automatically
The device provides options for setting time & date manually or update time & date
automatically from the DAB/FM radio signal.
1. Press Menu to access the menu list.
2. Press ◄ or ► to find《Time & Date》and then press Select/Info to select Clock
Setting.
Menu
<Time & Date>
3. Press ◄ or ► to find《Auto Update》and then press Select/Info to select Auto
Update setting.
Time & Date
<Auto Update>
4. Press ◄ or ► until《On》is displayed and then press Select/Info to switch on
Auto Update.
When Auto Update is on, you cannot select “Date Setting”, “Time Setting”
and ”Daylight Saving”.
The default setting is “Off”.
To Set Date Manually
If you turn off Auto Update, you need to set time and date manually.
1. Press Menu to access the menu list.
2. Press ◄ or ► to find《Time & Date》and then press Select/Info to select Clock
Setting.
3. Press ◄ or ► to until《Date Setting》is displayed and then press Select/Info to
set date.
Time & Date
<Date Setting>
4. Press ◄ or ► to select year and then press Select/Info to confirm. Then use
the same way to set month and date.
PR100
+
User Guide
9
Using the Menu control
To Update Clock Automatically
The device provides options for setting time & date manually or update time & date
automatically from the DAB/FM radio signal.
1. Press Menu to access the menu list.
2. Press ◄ or ► to find《Time & Date》and then press Select/Info to select Clock
Setting.
Menu
<Time & Date>
3. Press ◄ or ► to find《Auto Update》and then press Select/Info to select Auto
Update setting.
Time & Date
<Auto Update>
4. Press ◄ or ► until《On》is displayed and then press Select/Info to switch on
Auto Update.
When Auto Update is on, you cannot select “Date Setting”, “Time Setting”
and ”Daylight Saving”.
The default setting is “Off”.
To Set Date Manually
If you turn off Auto Update, you need to set time and date manually.
1. Press Menu to access the menu list.
2. Press ◄ or ► to find《Time & Date》and then press Select/Info to select Clock
Setting.
3. Press ◄ or ► to until《Date Setting》is displayed and then press Select/Info to
set date.
Time & Date
<Date Setting>
4. Press ◄ or ► to select year and then press Select/Info to confirm. Then use
the same way to set month and date.