User Manual

- 11 -
5. Channel Search
5.1 Channel Search 1) DiSEqC 1.2
1. Antenna : Select your antenna number.
2. Satellite : Select desired satellite using
Key, Pressing the OK key will also
display a list of satellites. You can see the
information of the selected satellite on the
right side.
Edit Mode: If you want to edit certain
preprogrammed data such as Transponder,
Frequency, Symbol Rate, Polarization and 22
KHz, press Edit mode key (Red color key) on the
RCU.
3. Position : After selecting a satellite, please select Position button and then keep pressing E or
W key on the RCU until the selected satellite is locked. If the satellite is locked correctly, the
color of the signal label bar will change to yellow.
When you press OK key on the RCU, the message Would you like to set the value of current
position? will be displayed.
4. Transponder : Select desired transponder using
keys. Pressing the OK key will
display a Down List Box which also lets you select the desired transponder.
5. Frequency & Symbol Rate : Edit the Frequency and Symbol Rate.
6. Polarization : Select Hor or Ver.
7. 22KHz : Select ON or OFFSearch 1 Sat :
Allows you to search channels using the
arrow keys.
· Search 1 SAT: Search channels for one
satellite, which has been selected from the
Satellite column.
· Search TP: Search channels in one TP,
which has been selected from the TP column.
· Search Network: Search channels for the
network related to the TP.
· Search all SAT: Search all channels at once
on all satellites.
Imperial DS1 will automatically search channels
for TV and Radio. During this procedure you can
see a list of the previously searched channels in
the Searched List Box on the screen.
On completion of searching channels, the cursor
will be placed on COMPLETE automatically.
Now press OK button.
9. Set PID: If you want to set PID (Packet
Identifier) manually, select TP in the Channel
Search Page and press MENU key on the
RCU to display the command box.
Then select SET PID command and press OK.
The set PID menu will be displayed. Enter the correct value and select OK.