Specification Sheet

Page 6
Motorized Damper
0.25 amps, 24 VAC, 60
HZ, 7 Watts
Low voltage wiring (A) from motorized fresh air
damper is connected directly to 24V power
transformer.
Low voltage wiring (B) from motorized fresh air
damper is connected to Switch Assembly. Wire ©
is connected from Switch Assembly to 24V Power
Transformer.
Elbow Switch Assembly
10A, 125VAC
(Elbow if necessary)
Elbow Switch Assembly (Optional)
The 90 degree Elbow model can be attached directly to an outside wall, giving the installer
or HVAC contractor the ability to complete even the tightest installations. Elbow must be
attached to rigid ducting.