Owner Manual COMPETITOR BENCH CB-280

STEP 2 (See Diagram 2)

A.) Attach the Main Seat Support (#3) to the Cross Brace (#2). Secure it with four M8 x 2

3/8” Hex Bolts (#18), one Bracket (#10), four Ø 5/8” Washers (#26), and four M8

Aircraft Nuts (#24). DO NOT tighten the Nuts and Bolts yet.

B.) Attach the Front Support (#5) to the Main Seat Support (#3). Secure the first hole to

the Main Seat Support with one M8 x 1 5/8” Carriage Bolt (#28), one Ø 5/8” Washer

(#26), and one M8 Aircraft Nut (#24). DO NOT tighten the Nut and Bolt yet.

C.) Attach one end of the Diagonal Support (#4) to the second hole on the Main Seat

Support. Align the holes and secure them together with one M8 x 1 ¾” Carriage Bolt

(#29), one Ø 5/8” Washer (#26), and one M8 Aircraft Nut (#24). Attach the other end

of the Diagonal Support to the Front Support (#5). Secure it with one M8 x ½” Hex Bolt

(#30) and Ø 5/8” Washer (#26).

D.) Securely tighten all Nuts and Bolts previously installed.

DIAGRAM 2