NOTE: Please read all instructions carefully before using this product Table of Contents Safety Notice Hardware Pack Assembly Instruction Deluxe Fan Bike AIR-1 Parts List Warranty Ordering Parts Model AIR-1 Retain This Manual for Reference 121209 ASSEMBLY & OWNER'S MANUAL IMPEX® INC. 2801 S. Towne Ave, Pomona, CA 91766 Tel: (800) 999-8899 Fax: (626) 961-9966 www.impex-fitness.com info@impex-fitness.
TABLE OF CONTENTS BEFORE YOU BEGIN...................................................................................……. 1 IMPORTANT SAFETY NOTICES..................................................................…… 2 WARNING LABEL PLACEMENT…………………………………………………… 3 HARDWARE PACK……….....…....................................................................…… 4 ASSEMBLY INSTRUCTIONS........................................................................…… 6 EXPLODED DIAGRAM……………………………………………………………….
IMPORTANT SAFETY NOTICE PRECAUTIONS This exercise machine is built for optimum safety. However, certain precautions apply whenever you operate a piece of exercise equipment. Be sure to read the entire manual before you assemble or operate your machine. In particular, note the following safety precautions: 1. Keep children and pets away from the machine at all times. DO NOT leave children unattended in the same room with the machine. 2. Only one person at a time should use the machine. 3.
WARNING LABEL PLACEMENT The Warning Labels and Caution Label shown here have been placed on the Rear Stabilizer, Main Frame. If the labels are missing or illegible, please call customer service at 1-800-999-8899 for replacement. Apply the labels in location shown. © IMPEX INC.
HARDWARE PACK NOTE: The following parts are not drawn to scale. Please use your own ruler to measure the size. © IMPEX INC.
COMPONENTS FOR ASSEMBLY © IMPEX INC.
ASSEMBLY INSTRUCTION Tools Required For Assembling the Machine: One Crossing Wrench and Allen Wrench, provided by manufacturer. NOTE: It is strongly recommended that two or more people assemble this machine to avoid possible injury. STEP-1 A.) Do not tighten Bolts until instructed to do so. B.) Attach the Front Stabilizer (#39) to the Main Frame (#35). Secure it with four M8 x 5/8” Allen Bolts (#5) and four 5/8” Washers (#6). C.) Attach the Rear Stabilizer (#55) to the Main Frame.
STEP 2 A.) Connect the Upper Computer Wire (#2) from the Front Post to the Computer Wire from the Computer (#1). B.) Attach the Computer to the Front Post (#4). Secure it with four Computer Philips Screws (#3). © IMPEX INC.
STEP 3 A.) Connect the Lower Computer Wire (#37) from Main Frame (#35) to the Upper Computer Wire (#2) from Front Post (#4). B.) Attach the Front Post to the Main Frame. Secure it with four M8 x 5/8” Allen Bolts (#5). © IMPEX INC.
STEP 4 A.) Attach the pivot on Left Swing Handle (#30L) to the pivot on Main Frame (#35). B.) Thread the Swing Handle Shaft (#28) though Left Swing Handle into Main Frame, and firmly secure them together. © IMPEX INC.
STEP 5 A.) Attach the Swing Handle Connecting Rod (#48) to the open bracket on the bottom of the Left Swing Handle (#30L). B.) Secure them together with one M8 x 1 ¾” Allen Bolt (#49) and one M8 Aircraft Nut (#50). © IMPEX INC.
STEP 6 A.) Attach the pivot on Right Swing Handle (#30R) to the pivot on Main Frame (#35). B.) Thread the Swing Handle Shaft (#28) through Right Swing Handle into Main Frame, and firmly secure them together. © IMPEX INC.
STEP-7 A.) Attach the Swing Handle Connecting Rod (#48) to the open bracket on bottom of the Right Swing Handle (#30R). B.) Secure them together with one M8 x 1 ¾” Allen Bolt (#49) and one M8 Aircraft Nut (#50). © IMPEX INC.
STEP-8 A.) Thread the Left Pedal (#41L) counter clockwise into Left Crank (#44L). B.) Thread the Right Pedal (41R) clockwise into Right Crank (#44R). © IMPEX INC.
STEP-9 A.) Remove the three Ø 5/8” Seat Flat Washers (#32) and M8 Seat Aircraft Nut (#33) from the Seat Pad (#31). B.) Attach the Seat Pad to the Seat Post (#34). Secure it with the three Ø 5/8” Seat Flat Washers (#32) and M8 Seat Aircraft Nut (#33) from the Seat Pad (#31). © IMPEX INC.
STEP-10 A.) Insert the Seat Post (#34) into the opening one Main Frame (#35). B.) Thread the Lock Knob (#63) through the hole on Seat Post to securely hold it at desired height. © IMPEX INC.
EXPLODED DIAGRAM © IMPEX INC.
PARTS LIST PART NO. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30L 30R 31 32 33 34 35 36 © IMPEX INC. DESCRIPTION SPEC.
37 38 39 40 41L 41R 42 43 44L 44R 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 © IMPEX INC.
CARE, MAINTENANCE AND STORAGE 1. Inspect and tighten all parts each time you use the machine. Replace any worn parts immediately. 2. The bike can be cleaned using a damp cloth and mild non-abrasive detergent. Do not use solvents. 3. Store the bike IN-DOOR. Excess moisture and water would cause rust on the frame. 4. The Bike shall be placed at least 24 inches away from the wall or/and any other object such as furniture to provide safe access to and passage around the machine. 5.
COMPUTER MODE Press “MODE” button, will automatically scan Time, Speed, RPM, Distance, and Calories, for every 6 seconds. Time Speed RPM Distance Calories Display the elapsed time. Max value is up to 99:59. Display the current speed in miles per hour. Display repetition/min, Speed and RPM display will switch to each other every 6 seconds. Display the distance traveled in Miles. Max value is 99.99 miles. Display the calorie consumption in cal. Increment by 10 cal. Max value is 999 calories. SET 1.
® IMPEX INC. LIMITED WARRANTY ® IMPEX Inc. ("IMPEX ") warrants this product to be free from defects in workmanship and material, under normal use and service conditions, for a period of two years on the Frame from the date of purchase. This warranty extends only to the original purchaser. IMPEX's obligation under this Warranty is limited to replacing or repairing, at IMPEX's option. All returns must be pre-authorized by IMPEX.