Owner's Manual

STEP 3 (See Diagram 3)

A.) Peel off the cover paper on the surface of the Right Outer Cover (#32) and Right

Inner Cover (#34).

B.) Attach the Right Outer Cover to the Right Station from the outside. Secure it with

six M6 x 1 ¾” Allen Bolts (#68), Ø ½” Washers (#59), and Cover Spacers (#40).

C.) Attach the Right Inner Cover (#34) to the Right Station from the inside. Secure it

with six M6 x 1 ¾” Allen Bolts (#68), Ø ½” Washers (#59), and Cover Spacers

(#40).

D.) Note: Do not over tighten the Bolts to avoid cracking the Covers.

E.) Repeat Procedures A through C above to install the other side.

DAIGRAM 3