Home Gym User Manual
Table Of Contents
- BEFORE YOU BEGIN...................................................................................... 1
- IMPORTANT SAFETY NOTICES..................................................................... 2
- HARDWARE PACK……….....…....................................................................... 4
- ASSEMBLY INSTRUCTIONS...............................................................….......... 7
- PARTS LIST…………………………………………………………….……….……. 34
- RESISTANCE CHART………………………………………………………………. 35
- WARRANTY.................................................................................................… 36
- ORDERING PARTS......................................................................................... 36
- DIAGRAM 3
- DIAGRAM 4
- DIAGRAM 5
- 21
- DIAGRAM 11
- DIAGRAM 13
- KEY NO. DESCRIPTION Q’ty
- Station
- Station
STEP 5 (See Diagram 5)
A.) Attach the Right Butterfly (#10) onto the axle on the Butterfly Base (#13).
B.) Insert the Butterfly Handle (#9) into the pivot on the Right Butterfly. Secure it with one M10 x
¾” Allen Bolt (#95) and Ø 1 ¼” x Ø 3/8” Washer (#70) from the bottom. Do not over tighten
the Bolt; make sure the handle is able to swivel.
C.) Repeat Procedure A & B above to install the Left Butterfly (#11).
DIAGRAM 5
13