Home Gym User Manual
Table Of Contents
- BEFORE YOU BEGIN...................................................................................... 1
- IMPORTANT SAFETY NOTICES..................................................................... 2
- HARDWARE PACK……….....…....................................................................... 4
- ASSEMBLY INSTRUCTIONS...............................................................….......... 7
- PARTS LIST…………………………………………………………….……….……. 34
- RESISTANCE CHART………………………………………………………………. 35
- WARRANTY.................................................................................................… 36
- ORDERING PARTS......................................................................................... 36
- DIAGRAM 3
- DIAGRAM 4
- DIAGRAM 5
- 21
- DIAGRAM 11
- DIAGRAM 13
- KEY NO. DESCRIPTION Q’ty
- Station
- Station
STEP 8 (See Diagram 8)
A.) Attach the Left Seat Support (#35) onto the Left Base Frame (#32). Secure it with one M10 x 3 ½”
Carriage Bolt (#99), Ø ¾” Washer (#100), and M10 Aircraft Nut (#102).
B.) Attach the Left Seat Support to the Left Vertical Frame (#33). Secure it with two M10 x 2 ¾”
Carriage Bolts (#98), one 4 ¾” x 2 ¾” Bracket (#25), two Ø ¾” Washers (#100), and two M10
Aircraft Nuts (#102).
C.) Attach the Right & Left Handle (#37& 38) to the Left Seat Support from each side. Secure them
together with two M10 x 2 ¾” Carriage Bolts (#98), Ø ¾” Washers (#100), and M10 Aircraft Nuts
(#102).
D.) Attach a Seat Pad (#42) to the Left Seat Support. Secure it with two M8 x 2 ½” Allen Bolts (#86)
and Ø 5/8” Washers (#101).
E.) Attach a Backrest Board (#43) to the Left Vertical Frame. Secure it with two M8 x 2 ½” Allen Bolts
(#86) and Ø 5/8” Washers (#101).
DIAGRAM 8
16