Owner's Manual

STEP 3 (See Diagram 3)

A.) Attach the side-holes on the two Backrest Supports (#8) to the pivot on the Main

Seat Support (#3). Place the other end of the Backrest Supports rest against the

Backrest Adjustment Bar (#6).

B.) Attach the Backrest Board (#11) to the Backrest Supports. Secure it with four M6 x 1

3/8” Hex Bolts (#28) and four Ø ½” Washers (#31).

C.) Place the Seat Pad (#10) onto the Main Seat Support (#3). Secure it with four M6 x

5/8” Hex Bolts (#29) and four Ø ½” Washers (#31).

DIAGRAM 3