Marcy Home Gym User's Manual
Table Of Contents
- BEFORE YOU BEGIN....................................................................................……….. 1
- IMPORTANT SAFETY NOTICE...................................................................……….. 2
- HARDWARE PACK……….....….....................................................................……….. 4
- ASSEMBLY INSTRUCTIONS.........................................................................……….. 6
- PARTS LIST………………………………………………………………………………….. 23
- RESISTANCE CHART………….......................................................................………. 24
- WARRANTY.................................................................................................…………. 25
- ORDERING PARTS.......................................................................................………… 25
- HARDWARE PACK
- ASSEMBLY INSTRUCTION
- STEP 7 (See Diagram 7)
- PARTS LIST
- KEY NO. DESCRIPTION Q’ty
- Station
- Low Pulley
- Leg Developer
- Leg Press
- Station
- Low Pulley
- Leg Developer
- Leg Press
STEP 4 (See Diagram 4)
A.) Attach the Right & Left Seat Swivel Frame (#13) & (#14) to Main Base Frame (#1) from each
side. Secure them together with one M12 x 7 7/8” Allen Bolt (#74), two Ø 1” Washer (#90),
and one M12 Aircraft Nut (#93). Do not over tighten the Nut and Bolt. Make sure the
Swivel Frames are able to swivel smoothly.
B.) Repeat above procedure to install the two Front Seat Swivel Frames (#12).
C.) Attach the Seat Support to the top of the two Seat Swivel Frames and Swivel Supports.
Secure them together with two M12 x 7 7/8” Allen Bolts (#74), four Ø 1” Washers (#90), and
one M12 Aircraft Nut (#93).
D.) Attach Leg Developer (#10 to open bracket on the Seat Support. Secure it with one 2 ½”
Axle (#60), two Ø ¾” Washers (#91), and two M10 x 5/8” Allen Bolts (#83).
DIAGRAM 4
12