Owner's Manual

STEP 4 (See Diagram 4)

A.) Insert the Front Press Handle (#12) into the hole on Right Butterfly (#10) and Left

Butterfly (#9). Secure each Handle with one M8 x ¾” Allen Bolt (#61) and one Ø 5/8”

Curved Washer (#76).

B.) Insert 15 ¾” Long Foam Tube (#31) halfway through the hole on Seat Support (#5).

Insert 15” Short Foam Tube (#22) halfway through the hole on Leg Developer (#7).

C.) Push four Foam Rolls (#26) onto the Tubes from both ends of each Tube.

DIAGRAM 4