Owner's Manual
Table Of Contents
- BEFORE YOU BEGIN...................................................................................…. 1
- IMPORTANT SAFETY NOTICES..................................................................…. 2
- HARDWARE PACK……….....…....................................................................…. 4
- ASSEMBLY INSTRUCTIONS........................................................................…. 6
- EXPLODED DIAGRAM………………………………………………………………. 12
- PARTS LIST...................................................................................................…. 13
- OPERATING NOTES………………………………………………………………… 14
- WARRANTY.................................................................................................……. 18
- ORDERING PARTS.....................................................................................……. 18
- A.) Insert the Sliding Frame (#41) through the Seat Support (#43). Use the Quick Release Knob (#42) to lock the Seat Support at selected position.
- B.) Attach the Sear Support to Rear Support Frame (#40) and secure them with eight M8 x ⅝” Allen Bolts (#21).
- C.) Place the Seat Pad (#45) onto the Seat Support. Secure the Seat Pad with four M x ⅝” Allen Bolts (#21).
- A.) Attach the Handle (#13) to Seat Support (#43). Securely tighten it with two M8 x 1 ⅝” Carriage Bolts (#28), two Ø 5/8” Curved Washers (#5), and two M8 Acorn Nuts (#29).
- B.) Attach the Backrest Board (#44) to the Seat Support. Secure it with four M8 x ⅝” Allen Bolts.
- MUSCLE TONING
- WEIGHT LOSS
© IMPEX INC. www.impex-fitness.com 9
STEP-4
A.) Insert the Sliding Frame (#41) through the Seat Support (#43). Use the Quick Release Knob
(#42) to lock the Seat Support at selected position.
B.) Attach the Sear Support to Rear Support Frame (#40) and secure them with eight M8 x ⅝” Allen
Bolts (#21).
C.) Place the Seat Pad (#45) onto the Seat Support. Secure the Seat Pad with four M x ⅝” Allen
Bolts (#21).