Owner's Manual
Table Of Contents
- BEFORE YOU BEGIN...................................................................................…. 1
- IMPORTANT SAFETY NOTICES..................................................................…. 2
- HARDWARE PACK……….....…....................................................................…. 4
- ASSEMBLY INSTRUCTIONS........................................................................…. 6
- EXPLODED DIAGRAM………………………………………………………………. 12
- PARTS LIST...................................................................................................…. 13
- OPERATING NOTES………………………………………………………………… 14
- WARRANTY.................................................................................................……. 18
- ORDERING PARTS.....................................................................................……. 18
- A.) Insert the Sliding Frame (#41) through the Seat Support (#43). Use the Quick Release Knob (#42) to lock the Seat Support at selected position.
- B.) Attach the Sear Support to Rear Support Frame (#40) and secure them with eight M8 x ⅝” Allen Bolts (#21).
- C.) Place the Seat Pad (#45) onto the Seat Support. Secure the Seat Pad with four M x ⅝” Allen Bolts (#21).
- A.) Attach the Handle (#13) to Seat Support (#43). Securely tighten it with two M8 x 1 ⅝” Carriage Bolts (#28), two Ø 5/8” Curved Washers (#5), and two M8 Acorn Nuts (#29).
- B.) Attach the Backrest Board (#44) to the Seat Support. Secure it with four M8 x ⅝” Allen Bolts.
- MUSCLE TONING
- WEIGHT LOSS
© IMPEX INC. www.impex-fitness.com 13
NS-1305R PARTS LIST
PART
NO.
DESCRIPTION
SPEC.
QUANTITY
1
Main Frame
1
2
Allen Bolt
M8 x 3”
2
3
Front Stabilizer
1
4
Lock Washer
Ø 5/8”
2
5
Curved Washer
Ø 5/8”
12
6
Rear Stabilizer
1
7
Front Stabilizer Roller End Cap
2
8
Rear Stabilizer End Cap
2
9
Front Post
1
10
Computer
1
11
Front Right Handle
1
12
Front Left Handle
1
13
Handle
1
14
Seat Support Sleeve
2
15
Upper Front Handle Foam Grip
2
16
Lower Front Handle Foam Grip
2
17
Crank
1
18
Tension Knob Screw
M5 x 1 ½”
1
19
Flat Washer
Ø ½”
1
20
Philips Screw
M5 x ⅜”
4
21
Allen Bolt
M8 x ⅝”
30
22
End Cap
2 ⅜” x ¾”
2
23
Carriage Bolt
M10 x 3”
2
24
Curved Washer
Ø ⅞”
2
25
End Cap
2 ⅜” x 1 ⅛”
2
26
End Cap
2 ⅛” x ⅞”
2
27
Front Handle End Cap
Ø 1”
6
28
Carriage Bolt
M8 x 1 ⅝”
2
29
Acorn Nut
M8
2
30
Handle Foam Grip
2
31
Acorn Nut
M10
2
32
Tension Knob/Upper Tension Cable
1
33
Lower Tension Cable
1
34
Middle Computer Wire
1
35
Lower Computer Wire
1
36
Right Pedal
1
37
Left Pedal
1
38
Flat Washer
Ø 5/8”
6
39
Leverage Knob
1
40
Rear Support Frame
1
41
Sliding Frame
1
42
Quick Release Lock Knob
1
43
Seat Support
1
44
Backrest Board
1
45
Seat Pad
1