Owner's Manual
Table Of Contents
- BEFORE YOU BEGIN...................................................................................…. 1
- IMPORTANT SAFETY NOTICES..................................................................…. 2
- HARDWARE PACK……….....…....................................................................…. 4
- ASSEMBLY INSTRUCTIONS........................................................................…. 6
- EXPLODED DIAGRAM………………………………………………………………. 12
- PARTS LIST...................................................................................................…. 13
- OPERATING NOTES………………………………………………………………… 14
- WARRANTY.................................................................................................……. 18
- ORDERING PARTS.....................................................................................……. 18
- A.) Insert the Sliding Frame (#41) through the Seat Support (#43). Use the Quick Release Knob (#42) to lock the Seat Support at selected position.
- B.) Attach the Sear Support to Rear Support Frame (#40) and secure them with eight M8 x ⅝” Allen Bolts (#21).
- C.) Place the Seat Pad (#45) onto the Seat Support. Secure the Seat Pad with four M x ⅝” Allen Bolts (#21).
- A.) Attach the Handle (#13) to Seat Support (#43). Securely tighten it with two M8 x 1 ⅝” Carriage Bolts (#28), two Ø 5/8” Curved Washers (#5), and two M8 Acorn Nuts (#29).
- B.) Attach the Backrest Board (#44) to the Seat Support. Secure it with four M8 x ⅝” Allen Bolts.
- MUSCLE TONING
- WEIGHT LOSS
© IMPEX INC. www.impex-fitness.com 14
CARE, MAINTENANCE AND STORAGE
1. Inspect and tighten all parts each time you use the machine. Replace any worn parts
immediately.
2. The bike can be cleaned using a damp cloth and mild non-abrasive detergent. Do not use
solvents.
3. Store the bike IN-DOOR. Excess moisture and water would cause rust on the frame.
4. The Bike shall be placed at least 24 inches away from the wall or/and any other object such as
furniture to provide safe access to and passage around the machine.
5. To avoid possible injury, the help of two or more people are needed when moving the machine
around.
6. Disposal Instructions – The equipment can be safely disassembled and disposed without
unreasonable hazards. Call your local recycle agency regarding details of recycling.
7. The maximum user weight is 300 lbs.
8. Assembled Dimension: 52.5” x 25” x 46.5”
OPERATING NOTES
ADJUSTMENT
1. Use the Tension Knob on Front Post to adjust the resistance for exercise.
2. The seat can be adjusted for 7 different height ranges from 30.5” to 37.8”.
3. Loosen and pull out the Quick Release Lock Knob. Slide the Seat Support to selected
scale marked on the Seat Post, then release the Lock Knob and securely fasten the Knob
to lock the Seat Support.
4. The seat adjustment is in approximately 1.18” for each increment.
TRANSPORT
The Bike has a pair Roller End Caps on Front Stabilizer.
To move, carefully hold and tilt the bike, and then roll.