Owner's Manual
Table Of Contents
- BEFORE YOU BEGIN...................................................................................…. 1
- IMPORTANT SAFETY NOTICES..................................................................…. 2
- HARDWARE PACK……….....…....................................................................…. 4
- ASSEMBLY INSTRUCTIONS........................................................................…. 6
- EXPLODED DIAGRAM………………………………………………………………. 12
- PARTS LIST...................................................................................................…. 13
- OPERATING NOTES………………………………………………………………… 14
- WARRANTY.................................................................................................……. 18
- ORDERING PARTS.....................................................................................……. 18
- A.) Insert the Sliding Frame (#41) through the Seat Support (#43). Use the Quick Release Knob (#42) to lock the Seat Support at selected position.
- B.) Attach the Sear Support to Rear Support Frame (#40) and secure them with eight M8 x ⅝” Allen Bolts (#21).
- C.) Place the Seat Pad (#45) onto the Seat Support. Secure the Seat Pad with four M x ⅝” Allen Bolts (#21).
- A.) Attach the Handle (#13) to Seat Support (#43). Securely tighten it with two M8 x 1 ⅝” Carriage Bolts (#28), two Ø 5/8” Curved Washers (#5), and two M8 Acorn Nuts (#29).
- B.) Attach the Backrest Board (#44) to the Seat Support. Secure it with four M8 x ⅝” Allen Bolts.
- MUSCLE TONING
- WEIGHT LOSS
© IMPEX INC. www.impex-fitness.com 7
STEP-2
A.) Do not tighten Bolts until instructed to do so.
B.) Attach the Rear Support Frame (#40) to Main Frame (#1). Secure them together with six M8 x
⅝” Allen Bolts (#21) and six Ø 5/8” Flat Washers (#38).
C.) Attach the Rear Stabilizer (#6) to the Rear Support Frame. Secure them together with two M10 x
3” Carriage Bolts (#23), two Ø ⅞” Curved Washers (#24), and two M10 Acorn Nuts (#31).
D.) Securely tighten all Bolts and Nuts.
E.) Thread the Leverage Knob (#39) to Main Frame from bottom to stabilize the Bike on floor.