NOTE: Please read all instructions carefully before using this product WEIGHT PLATE RACK Table of Contents STB-0130 Safety Notice Assembly Instruction Parts List Warranty Ordering Parts Model STB-0130 Retain This Manual for Reference 150501 ASSEMBLY MANUAL IMPEX INC. 2801 S. Towne Ave, Pomona, CA 91766 Tel: (800) 999-8899 Fax: (626) 961-9966 www.impex-fitness.com info@impex-fitness.
TABLE OF CONTENTS BEFORE YOU BEGIN…………………………………………………….1 IMPORTANT SAFETY NOTICES………………………………………..2 WARNING LABELPLACEMENT……………………………………… 3 HARDWARE PACK………………………………………………………. 4 ASSEMBLY INSTRUCTIONS…………………………………………….5 EXPLODED DIAGRAM……………………………………………………6 PARTS LIST……………………………………………………………….. 6 WARRANTY……………………………………………………………….. 7 ORDERING PARTS………………………………………………………. 7 BEFORE YOU BEGIN Thank you for selecting the STEELBODY Weight Plate Rack STB-0130 by IMPEX INC.
IMPORTANCE SAFETY NOTICE PRECAUTIONS Certain precautions apply when you operate a piece of exercise equipment. Be sure to read the entire manual before you assemble or operate your machine. In particular, note the following safety precautions: 1. Keep children and pets away from the equipment at all times. DO NOT leave children unattended in the same room with the equipment. 2. If the user experiences dizziness, nausea, chest pain, or any other Abnormal symptoms, STOP the workout at once.
WARNING LABEL PLACEMENT The Warning Label shown here has been placed on the Rack Storage Frame. If the label is missing or illegible, please call customer service at 1-800-999-8899 for replacement. Apply the label in location shown. Impex Inc 3 www.impex-fitness.
HARDWARE PACK NOTE: The following parts are not drawn to scale. Please use your own ruler to measure the size. Impex Inc 4 www.impex-fitness.
ASSEMBLY INSTRUCTION Tools required for assembling this equipment: Two Adjustable Wrenches. It is strongly recommended that two or more people assemble this fixture to avoid possible injury. STEP-1 (See Diagram 1) A.) Attach the Handle (#2) to the Storage Rack Frame (#1). Secure it to the Storage Rack Frame with two M10 x 2 ⅛” Hex Bolts (#10), one Bracket (#5), four Ø ¾” Washers (#17), and two M10 Aircraft Nuts (#13). B.) Push Handle Grip (#4) onto the Handle. Plug the Handle End Cap (#6) onto the Handle.
EXPLODED DIAGRAM STB-0130 PARTS LIST PART NO. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 Impex Inc DESCRIPTION SIZE Storage Rack Frame Handle Roller Wheel Handle Grip Bracket Handle End Cap End Cap End Cap Rubber Bumper Hex Bolt Philips Screw Lock Ring Aircraft Nut Aircraft Nut Washer Washer Washer QUANTITY 6” 3 ½” x 2 ⅛” Ø 1” 1” x 1” 1 ½” x 1 ½” Ø 1 ½” x ⅝” M10 x 2 ⅛” M6 x 2” Ø ⅝” M10 M6 Ø 1 ⅛” Ø ½” Ø ¾” 6 www.impex-fitness.
IMPEX INC. LIMITED WARRANTY IMPEX Inc. ("IMPEX") warrants this product to be free from defects in workmanship and material, under normal use and service conditions, for a period of ten years on the Frames and two years on the parts from the date of purchase. This warranty extends only to the original purchaser. IMPEX's obligation under this Warranty is limited to replacing or repairing, at IMPEX's option. All returns must be pre-authorized by IMPEX.