Owner's Manual

ASSEMBLY INSTRUCTION

 Tools Required For Assembling the Bike: One Crossing Wrench and Allen Wrench,

provided by manufacturer.

 NOTE: It is strongly recommended that two or more people assemble this bike to

avoid possible injury.

STEP-1

A.) Attach the Front Stabilizer (#2) to the Main Frame (#1). Secure it with two M10 x ¾” Allen Bolts (#30),

two Ø ¾” Lock Washers (#31), and two Ø ¾” Curved Washers (#32).

B.) Attach the Rear Stabilizer (#3) to the Main Frame (#1). Secure it with two M10 x ¾” Allen Bolts (#30),

two Ø ¾” Lock Washers (#31), and two Ø ¾” Curved Washers (#32).

C.) Adjust the Level Adjustment Knobs (#9) to stabilize the Bike on floor.

D.) Thread the Right Pedal (#21) clockwise onto the right Crank (#22).

E.) Thread the Left Pedal (#21) counterclockwise onto the left Crank (#22)

F.) Attach Water Bottle Rack (#23) to the Main Frame (#1), Secure with two ST4.2 x 5/8” Self Tapping

Philips Screws (#38).