Owner's Manual

STEP 2

A.) Insert the Handle Post (#7) into the front opening on Main Frame (#1). Use the Lock Knob (#13) to

hold the Handle Post at selected height.

B.) Attach the Handle (#8) to the Handle Post. Secure them together with two M10 x ¾” Allen Bolts

(#33), two Ø ¾” Lock Washers (#34), and two Ø ¾” Curved Washers (#35).

C.) Insert the Vertical Seat Post (#4) into the opening on Main Frame. Use the Lock Knob (#13) to hold

the Seat Post at selected height.

D.) Flip over the Seat Pad (#16). Insert the tube on the Seat Support (#5) into the open slot and

securely fasten the two Nuts to secure the Seat Pad to the tube.

E.) Insert the Seat Support (#5) through the open slot on Seat Post. Use the Seat Lock Knob (#14) to

hold the Seat at selected position.