Spec Sheet

Speedway
®
Revolution Readers At A Glance
Impinj, Inc. 701 N. 34th Street, Suite 300 Seattle, WA 98103 www.impinj.com
rfi[e-mail] Tel: [phone] Fax: [phone]
Impinj, Speedway, Powered by Impinj, and Monza are either registered trademarks or trademarks of Impinj, Inc.
Other brands and names may be claimed as the property of others.
Copyright © 2011, Impinj, Inc. All rights reserved.
PRODUCT DETAILS SPEEDWAY R420 SPEEDWAY R220
Air Interface Protocol EPCglobal UHF Class 1 Gen 2 / ISO 18000-6C
Performance Includes all possible performance configurations Intended for less demanding applications.
and functionality to deliver peak performance Does not support the maximum throughput
for even the most challenging of applications modes available on R420 including Max Throughput
FM0, Hybrid, Max Miller and AutoSet Single Reader
Supported Regions • US, Canada, and other regions following US FCC Part 15 regulations
or Geographies • Europe and other regions following ETSI EN 302 208 v1.2.1 without LBT regulations
For complete region list visit:
http://www.impinj.com/Speedway_Revolution_Reader.aspx
Antennas 4 high performance, monostatic antenna ports 2 high performance, monostatic antenna ports
optimized for Impinj reader antennas (RP TNC) optimized for Impinj reader antennas (RP TNC)
Transmit Power • +10.0 to +30.0 dBm (PoE)
• +10.0 to +32.5 dBm (external universal power supply)
Max Receive Sensitivity -82 dBm
Min Return Loss 10 dB
Application Interface EPCglobal Low Level Reader Protocol (LLRP) v1.0.1, Speedway Revolution SDK & EDK
Network Connectivity 10/100BASE-T auto-negotiate (full/half) with auto-sensing MDI/MDX for auto-crossover (RJ-45)
Cellular Connectivity* • Sierra Wireless AirLink PinPoint XT (CDMA or GSM connectivity with GPS data)
• Sierra Wireless AirLink Raven XT (CDMA or GSM connectivity)
(* Available through Impinj-authorized partners)
IP Address Configuration DHCP, Static, or Link Local Addressing (LLA) with Multicast DNS (mDNS)
Time Synchronization Network Time Protocol (NTP)
Management Interfaces • Impinj Web Management UI
• Impinj RShell Management Console using serial management console port, telnet or SSH
• SNMPv2 MIBII
• EPCglobal Reader Management v1.0.1
• Syslog
Reliable Firmware Upgrade • Dual image partitions enable smooth transition to new firmware while the reader is still operating
• Scalable upgrade mechanism enables simultaneous scheduled upgrades of multiple readers
• USB Flash Drive
• Impinj Web Management UI
Management Console • RS-232 using a standard Cisco-style management cable (DB-9 to RJ-45)
• Baud rate: 115200, Data: 8 bit, Parity: none, Stop: 1 bit, Flow control: none
USB • USB 1.1 Device (Type B) and Host (Type A) ports
• USB Virtual COM Serial Port and USB drive support for embedded applications
GPIO • 4 inputs, optically isolated 3-30V; 4 outputs, optically isolated, 0-30V, non-isolated 5V,
100mA supply (DB-15)
Power Sources • Power over Ethernet (PoE) IEEE 802.3af
• +24 VDC @ 800mA via external universal power supply with locking connector—sold separately
Power Consumption Idle Typical LDC
PoE at +30 dBm 3W 11.5W 6W
Power Supply at +30 dBm 3W 13.5W 6W
Power Supply at +32.5* dBm 3W 15W 6W
(*maximum is 31.5 dBm for ETSI region readers)
Environmental Sealing IEC IP52
Shock and Vibration Mil-Std-810G Certified
Operating Temperature -20 ºC to +50 ºC
Humidity 5% to 95%, non-condensing
Dimensions (H x W x D) 7.5 x 6.9 x 1.2 in (19 x 17.5 x 3 cm)
Weight 1.5 lbs (24.5 oz)
RoHS Compliant to European Union directive 2002/95/EC