User's Manual

Speedway Revolution Installation and Operations Guide Octane 4.4

Chapter 2: Installing and Connecting

7. Select Open. The Rshell console window opens.

8. Press Enter. The Rshell login prompt appears.

Figure 2.6 COM1 Putty Login Prompt

9. Log in with the following default credentials unless you customized them:

User Name: root

Password: impinj

10. When the Rshell command line prompt appears, begin configuring the

network settings for the reader. See “Using Rshell to Configure Network

Settings for Speedway Revolution” on page 14 for details.

11. When you have completed configuration of the appropriate network

settings, connect the reader to your Ethernet network as described on

page 11.

 Note: If you decide to connect to DHCP after connecting serially, remember to

use Rshell to change the IP address on the reader from static to dynamic. See

“Using Rshell to Configure Network Settings for Speedway Revolution” on page

15 for details.

Step 5: Test the Installed Reader

Confirm connections and functionality is correct by reading tags. Using the

MultiReader, a Windows PC test application from Impinj, you can quickly verify

reader operation by configuring various reader parameters and running simple

inventory operations. For details about how to access and use MultiReader, see

page 15.