Operations Guide
5 Installing and Connecting the Impinj R700 Reader
This section provides details about the R700 reader I/O ports and status LEDs. It also explains how to
install the reader and connect it to your network.
5.1 R700 Reader Ports and LEDs
The following graphic illustrates the I/O ports located on the Impinj R700 reader.
R700 reader Port Connections
Note: See Appendix B: GPIO Details for functional and electrical speciî™˝cations, and for details about each
pin of the GPIO connectors (Phoenix Contact 1803345).
Antenna ports and LED status indicators are located on the back panel of the reader. The graphic below
illustrates their locations:
R700 Reader Antenna Ports and Status LEDs
Antenna LEDs are located on the top surface of the reader, next to the antenna ports. The graphic below
shows their locations:
11