Operations Guide

Impinj R700 Mounting Bracket Locations
2. Use a ¼ inch diameter bolt with 20 threads per inch (¼–20) or M6 screws to secure the unit. You can
mount the reader either horizontally or vertically.
Caution: If there is any chance of dust or water exposure, you should mount the reader so that the
Ethernet, USB, Console, and GPIO ports are facing down to prevent ingress.
Attention: Si il n’y a aucune chance de poussière ou d’eau exposition, vous devez monter le lecteur de
sorte que les ports Ethernet, USB, console et GPIO sont orientés vers le bas pour empêcher la pénétration.
To mount the R700 reader using the VESA mounting holes:
1. Remove the supplied mounting brackets.
2. Attach the reader to a standard 100 x 100 mm VESA mount, using the pre-drilled holes shown in the
gure below.
15