Manual

MMD-4300C
30” color TFT LCD
4MP-2560(H) x 1600(V)
Max. luminance: 370cd/m²
Max. calibrated luminance: 250cd/m²
Built-in front sensor for conformance testing and auto-dimming function
Selectable Gamma 1.8,2.0,2.2 and DICOM calibration
Single 4MP and dual 2MP viewing setups
Intelligent display mode auto adjustment with graphic card auto detection
Ready for Deep color and HDMI™ 1.3 with GrayEasy® technology
and 30-bit color dithering
Intelligent color-to-gray conversion for grayscale applications
IPXX / IPX2 compliance
30”, 4MP diagnostic color display
30
-bit
4MP
Dual Viewing Mode
Through two DVI signal inputs, the MMD-4300C can be congured to display
in a dual 2MP viewing mode. With color-to-grayscale conversion technology,
the MMD-4300C can be viewed in multiple modes for side-by-side image
comparison purpose. The independent Look-Up-Table for DICOM and Gamma
calibration ensures the best display quality for diagnostic applications. The real-
time adjustment of multiple display modes can be simply achieved through
SmartOSD software utility.
Single Viewing Mode
In single viewing mode, the MMD-4300C is displayed as a single 4MP
monitor, either in color or in grayscale mode.
Multiple Viewing Modes & Color to Grayscale Technology
GrayEasy® 30-bit Deep Color
30-bit color image (10-bit for each RGB element) can be displayed on
PACSmate monitors without any image loss. Through PACSmate’s unique
GrayEasy® technology, there’s no need to replace the monitors for future
HDMI 1.3 supported deep color display capabilities.
Single 4MP in color mode
Single 4MP in grayscale mode
Dual-link DVI-D
2560 x 1600
Dual-link DVI-D
2560 x 1600
Single/ Dual-link DVI-D
1280 x 1600
Single-link DVI-D
1280 x 1600
Single/ Dual-link DVI-D
1280 x 1600
Single-link DVI-D
1280 x 1600
Single/ Dual-link DVI-D
1280 x 1600
Single-link DVI-D
1280 x 1600
Single/ Dual-link DVI-D
1280 x 1600
Single-link DVI-D
1280 x 1600
Dual portrait 2MP grayscale/color mode Dual portrait 2MP color/grayscale mode
Dual portrait 2MP color mode Dual portrait 2MP grayscale mode
Single 4MP viewing mode &
Dual 2MP viewing mode
A
vailable
MMD-4300C is implemented with the VESA DDC/CI protocol and the standard VESA Monitor Control Command Set (MCCS), the universal communication
interface, enabling remote control management through network. MMD-4300C allows easier two-way communications with the host PC through only DVI
cable, instead of additional serial or USB cables. Through DDC/CI protocol, the software OSD manages the MMD-4300C remotely. PACSmate also provides
software OSD customization services with command library and customer dened MSSC command programming.
Various software OSD functions:
• Power on/off • Luminance selection
• Display mode selection: 4MP/2MP, color/monochrome • DICOM/ Gamma Look-Up-Table selection
• Gamma and color temperature selection • Monitor information
100% Compatible With VESA DDC/CI Protocol
Customer Assurance
PACSmate series are applied to the following safety standards, including
UL 60601-1, CE (EN 60601-1-2), FCC Part 18, TÜV GM, VCCI, BSMI
and CCC.