User guide

Features:
Model # R10L100-MRM2
Marine Bridge System Display
10.4"
Marine Bridge System Display
10.4"
Mechanical Design Drawings
TFT Characteristics:
Pixel Number
Pixel Pitch(RGB)
Contrast Ratio
Light Intensity
Viewable Angles
Active Display Area
Max Colors
800 x 600
0.264(H) x 0.264(V)
500 : 1(typ.)
400 cd/m (typ.)
-70~70(H);-60~50(V)
211.2(H) x 158.4(V) mm
16.7M (8bit/colors)
:
:
:
:
:
:
:
User Controls:
Power On/Off via Front Button
VR Brightness Knob Control
Power Mode Status LED
On Screen Display control(OSD)
OSD Remote Control via RS-232
Input Signals:
RGB Signal
Composite Video
S-Video Signal
DVI-D Signal
DC Power Signal
AC Power Signal (optional)
Touch Screen (Optional)
Remote via RS-232(Optional)
D-SUB 15P connector(female)
RCA phono plug
S-Video (SVHS) plug
DVI-D input 24pin connector
Screw terminal block
Std IEC Inlet
D-SUB 9P connector (female)
D-SUB 9P connector (female)
:
:
:
:
:
:
:
:
Hyper Dimming
Sunlight Readable
Wide Voltage Range Input
Multiscan Function
IP65 OSD Fornt Panel Design
Anti-Shock and Vibration
24V DC to DC power input acceptable (Isolation Resistance)
PIP(picture in picture) function and multi-video inputs
Ease of use front panel OSD control
Enhanced shock and vibration resistance
:
:
:
:
:
:
:
:
Revised Date : 03/15/2012Note: All Specifications are subject to change without prior notice!
Anti-Corrosion & IP Proof
Touchscreen/ Protection Glass
Dimming knob control backlight brightness from nearly 0% to 100%
Transflective film technology enhance visibility
Certification and Approvals : IEC 60945, DVN 2.4, IACS-E10
DNV Type Approval, CE, FCC
IP65 aluminum housing with powder coating design (IP54 rear)
High quality touchscreen / AR protection glass for option
2
*
Note: this is a simplified drawing and some components are not marked in detail.
Please contact our sales representative if you need further product information.
Mechanical and Environmental:
Mechanical Mounting
Operating Temperature
Operating Humidity
Anti-Vibration
Anti-Shock
* SAW touch for IP54
Panel (Flush) mount with IP65*, VESA, Bracket mounting
-10 to 55 deg.C (-20 to 60 deg.C for optional heating)
5% to 95% (non condensing)
5Hz~500Hz / 1Grms/3 Axis
15G, 11ms duraiton
:
:
:
:
:
Available Options:
AR Safety Glass Options
Transflective Options
AC power Options
Bracket Mounting Options
Touch Screen Options
:
:
:
:
:
SAW, 5 Wire Resistive
3mm Anti-reflective protection glass
Yes (Enhance Visibility)
Yes (90 to 265 V AC power input)
Yes (One robust bracket can adjust from -10 to 30 deg.)
Type Approved
Product
Power Specifications:
Power Supply Options
Power Consumption
:
:
24 V DC power supply with Terminal block (Default, Isolation
Resistance)
21 W typical, normal operation
IP65 OSD
Front Panel
Front Bezel
Touch / Glass
(Optional)
Panel
(Optional)
Inverter Board
Wide Voltage Range Power Module
Touch Controller
Metal Frame
Scaling Board
Modularized Construction
Front View
Side View
Rear View
Bottom View
24V DC
Terminal Block
RS232
for Touch
S-Video
Composite
DVI
VGA
RS232
Remote Control
for
GND
Cutout