Owner's manual

Mechanical Drawing
Specifications
Sunlight Readable LCD
12.1"
2
Model Name
Viewable Size Image
Active Display Area(mm)
Pixel Pitch(mm)
Number of Pixels
Contrast Ratio
Display Color
Brightness(cd/m )
Viewing Angle(CR>=10)
Synchronization Range
Horizontal/Vertical
Recommended Resolution
Signal Connector
Power Source
Power Consumption
Power Management
Plug & Play
Optional Video Input
Optional DVI Input
Optional Touch Screen
Optional protection glass
ection rate < 0.5%)
Operation Temperature
(refi
R12L600-CHM2TR
12.1"
245.76(H) x 184.32(V)
0.240(H) x 0.240(V)(typ.)
1024 x 768
500:1(typ.)
262144(6bit/colors)
500(typ.)
120(H); 100(V)
31.5~60.0KHz/60~75Hz
1024 x 768@60Hz, 75Hz
15 pin D-Sub
AC100~240V, Universal, 10%
20W typical, normal operation
VESA DPMS Compliant
VESA DDC 1/2B
S-Video, Composite
No
Resistive, Capacitive, SAW, IR
Optional
0 0
0 C~50 C
*
±
UNIT:mm
Note: this is a simplified drawing and some components
are not marked in detail. Please contact our sales
representative if you need further product information.
*
Ambient light(nit)
Brightness gain(nit)
Reflectance(net)(%)
15,000 30,000 80,000
500 620
990
1.0% 0.9%
0.8%
Outdoor readability **
35°
Brightness measure
Angle
Specifications are subject to change without notice.
Reflectance rate will change by LCD panel ITO glass design and coating ratio.
* ：Average brightness measured at center point under bright after enhancement.
Actual number may deviate from this number due to orignal panel's brightness deviation.
**：Expected brightness under different ambient environment.
Simulated brightness number for reference.
Remarks:R12L600 series= VGA Input only
R12L630 series= VGA+Video Input