Use and Care Manual



Remove all packing material and literature



Before using your IMUSA Espresso Cappuccino Maker for the ﬁrst time

familiarize yourself with all safety features and components



Wash all removable elements in warm soapy water Rinse and dry thoroughly

Wipe the outer housing with a clean damp cloth Never immerse this appliance

in water or any other liquid Never clean any part in a dishwasher



Run full cycle with water or vinegar to clean until See Care & Cleaning Section



Make sure that all pieces are working properly



Make sure the control knob is in the “oﬀ” position



Now you are ready to start making espresso

MAKING ESPRESSO

Read and follow instructions carefully for the best results

 Make sure the control knob is in the “off” position

 Remove the water reservoir lid by turning it counterclockwise and remove it from

the appliance

 Fill the glass carafe to either the  or  water level marking on carafe  based on how

much coffee you would like Pour the water into the reservoir Place the cover on the

glass carafe and place it into position on the drip plate

 Turn clockwise to close the water reservoir lid Make sure it is closed properly and

tightly so steam doesn’t escape during brewing process

 Remove the filter basket and holder from the appliance by turning clockwise With

the measuring spoon measure the proper amount of espresso ground coffee and

place into the filter basket

 Make sure the filter and basket are properly installed

 Insert the filter holder into the brewing head by pushing it upward so it is aligned

with the matching slots Turn the handle counterclockwise until securely locked

 Switch the control know to “brew”

 After approximately  minutes espresso coffee will flow into the carafe

 Do not open the lid to the water reservoir or remove the filter holder during the

brewing process Scolding may occur

 When the coffee has stopped flowing into the carafe turn the control knob to the

“off” position

 Prior to removing the lid on the water reservoir or filter holder turn the control knob

to the full steam position and wait until all steaming stops from the nozzle Then turn

the control know to the “off” position