User Guide

Digital Voice Audio Recorder User Manual

●Appearance and Buttons :

1. Turn on/off button

2. Indicative light

3. Reset hole

● Instructions:

◆ One button recording

Push the power button to “ON” position, the indicative light becomes red, then

flashes twice and goes out, the recorder starts recording.

◆ Stop recording

When recording, push the button to “OFF” position or connect it to the computer,

the red light flashes and then goes out , it stops and save the recording files.

◆ Playback

Connect the USB disk recorder to the computer (no need CD driver), upload the

recording files and playback in your computer.

◆ Charging

Connect the USB interface to computer or other device, when the red light twinkles,

it’s charging. When full charged, the indicative light becomes red. It can continue

recording around 15 hours once fully recharged.

(NOTE: If the indicative light become red twinkles during recording, which means

the power is low, please stop recording and charging in time.)